87
A:
Place 1 Hand Grip over the existing holes in (0602) Short Side Trim, making sure that it’s centered and flush
to the edges. Pre-drill with a 1/8: (3.2mm) drill bit and attach Hand Grip with 2 (LS2) 1/4 x 2-1/2” Lag Screws
(with flat washers). (fig. 40.1 and 40.2)
B:
Repeat step to install a second Hand Grip on the other side.
Step 40: Attach Hand Grips
centred on face and
flush to edge of Side Trim,
both sides
1/4” flat
washer
1/4” flat
washer
Steel Hand Grip
per side
Fig. 40.1
Short Trim
15.9 x 76.2 x 402mm
LS2
1/4 x 2-1/2" Lag Screw
w/ flat washer
X4
centred on face and
flush to edge of Side Trim,
both sides
Side Trim
15.9 x 76.2 x 515mm
0601
LS2
LS2
Hardware
4 x
¼ x 2-1/2” Lag Screws (with flat washers)
2 x Steel Hand Grip
Other Parts
LS2
Fig. 40.2
