25
It is important to assemble the frame on a flat, smooth surface.
A:
Place (2771) End Post and (2770) End Post Left side by side with the grooves facing up and in. Put (2770)
End Post Left on the right hand side. Place (2775) Panel Cross Support in the top grooves, (2772) Panel Floor
Support in the middle grooves and (2769) Panel BT Frame in the bottom grooves. (fig. 2.1).
B:
Make sure assembly is square then attach with 4 (S30) #8 x 1-1/16” Wood Screws per board. (fig. 2.1)
C:
Tap 3 (TN1) 1/4” T-nuts in (2775) Panel Cross Support and (2772) Panel Floor Support and 2 in (2769) Panel
BT Frame. (fig. 2.1 and 2.2)
24 x
#8 x 1-1/16”
Wood Screw
16 x
1/4” T-nut
2 x
End Post 31.8 x 63.5 x 2209.8 mm
2 x
End Post Left 31.8 x 63.5 x 2209.8 mm
2 x
Panel Cross Support 31.8 x 76.2 x 1066.8mm
2 x
Panel Floor Support 31.8 x 76.2 x 1066.8mm
2 x
Panel BT Frame 31.8 x 76.2 x 1066.8mm
S30
2775
Wood Parts
Hardware
2772
2771
2770
2769
Fig. 2.2
Fig. 2.1
Bottom
Top
2772
2775
2770
2771
2769
S30
S30
x 3
x 3
x 2
x 4
x 4 per
board
Flush
Flush
TN1
TN1
TN1
TN1
TN1
Step 2: Front and Back Wall Prep
Part 1
Lookout Tower & Swing
