55
3X #8 x 2 WS
A
C
flush to end of Roof End
flush to side edge of Roof End
B
Build 4 of these assemblies
3X #8 x 2 WS
A
C
flush to end of Roof End
flush to side edge of Roof End
B
Build 4 of these assemblies
3X #8 x 2 WS
A
C
flush to end of Roof End
flush to side edge of Roof End
B
Build 4 of these assemblies
3X #8 x 2 WS
A
C
flush to end of Roof End
flush to side edge of Roof End
B
Build 4 of these assemblies
Step 21: Attach Roof Panels
Part 1
Note: It is important to ensure that there is a 5mm square opening in the top, center of the roof. This will
be used in a later step.
A:
Bend roof panel along the fold to allow the panel to fit between the gables. (Fig. 21.1)
B:
Place panel onto the gable as shown in fig. 4.1, making sure that it’s flush to the end and side edge of the
(2852) Roof End. (fig. 21.2 and 21.3)
C:
Attach the roof panel to (2852) Roof End using 3 (S11) #8 x 2” Wood Screws per side. (fig. 21.1 and 21.4)
Flush to end of
Roof End
x 3
Flush to side edge
of Roof End
Roof
Panel
Flush
Fig. 21.1
Fig. 21.2
Fig. 21.4
Fig. 21.3
2852
2852
2852
S11
Hardware
6 x
#8 x 2” Wood Screw
S11
Bend
Panels
Other Parts
4 x Roof
