122
Step 64: Attach Elbow Assembly to Flange Assembly
Note: Keep all bolts loose until further step.
A:
Fit one of the Elbow Assemblies to the Flange Assembly by lining up the arrows on each assembly. Attach
Elbow Assembly to Flange Assembly using 6 ¼ x 12.7mm” Pan Bolts and Square Lock Nut. (Fig. 64.2 & 64.3).
B
: Attach one of the Elbow assemblies to another Elbow Assembly making sure to line up the arrows on each
assembly. Attach using 6 ¼ x 12.7mm Pan Bolts with Square Lock Nut. Repeat this instruction to make 2 more.
(Fig. 64.2 & 64.3)
Use Quadrex Driver as a guide pin for each hole before inserting bolt.
Quadrex Driver
Use special driver provided
in locations where the curve
of the elbow are difficult to
reach with a standard driver.
Fig. 64.1
Fig. 64.3
Align each elbow using the
molded arrows.
Fig. 64.2
Top Slide Bolt Holes
Elbow
Assembly
Flange
Assembly
Square
Lock Nut
¼ x 12.7mm
Pan Bolt
Other Parts
1 x Quadrex Driver
24 x 1/4 x 12.7mm Pan Bolt
24 x 1/4” Square Lock Nut
