113
S37
A
B
Fig. 57.10
seat
Plug
Shovel
Sand and
Water Insert
A
B
A
B
Hardware
H:
Place the Sand and Water Insert into the opening of the assembly then tighten all the bolts.
I:
Secure the Sand and Water Insert to the assembly using 8 (S37) #7 x 5/8” Pan Screws as shown in. (Fig.57.8
& 57.9 & 57.10)
J:
Insert plugs into the drain holes and put the shovel into the Sand and water Insert
.
Place the seat over the
Sand and Water Insert. (fig. 57.10)
Fig. 57.8
8 x
#7 x 5/8” Pan Screws
S37
Step 57: Sand and Water Table Assembly
Part 4
S37
x 8
Sand and
Water Insert
1 x 3 in 1 Bench set ( 1 x Shovel
2 x Plug
1 x Seat
1 x Sand and Water Insert )
Other Parts
Fig. 57.9
