27
Step 3: End Wall Prep
Part 1
It is important to assemble the frame on a flat, smooth surface.
A:
Place (2768) Panel Floor and 2 (2769) Panel BT Frames on a hard, flat surface with the long side up. Tap in
2 (TN1) T-nuts per board. (fig. 3.1)
B:
Place (2771) End Post and (2770) End Post Left side by side with the grooves facing up and in. (2770) End
Post Left on the right hand side. Place (2769) Panel BT Frames in the top and bottom grooves and (2768) Panel
Floor in the middle grooves. (fig. 3.2).
C:
Make sure assembly is square then attach with 4 (S30) #8 x 1-1/16” Wood Screws per board. (fig. 3.2)
12 x
#8 x 1-1/16” Wood Screw
6 x
1/4” T-nut
1 x
Panel Floor 31.8 x 76.2 x 1066.8mm
2 x
Panel BT Frame 31.8 x 76.2 x 1066.8mm
1 x
End Post 31.8 x 63.5 x 2209.8 mm
1 x
End Post Left 31.8 x 63.5 x 2209.8 mm
S30
2768
Wood Parts
Hardware
2771
2770
2769
Fig. 3.2
Fig. 3.1
Bottom
Top
2768
2770
2771
2769
S30
x 4
Flush
Flush
2769
Flush
S30
x 4
S30
x 4
2768
2769
2769
TN1
TN1
TN1
TN1
