Kidde Fire Protection 400 Series, Design, Installation, Operation, And Maintenance Manual

Page: 116 / 190

Installation
July 2018 4-28 06-237518-001
4-13.2 Cylinder
Each cylinder shall be labelled with the following:
•
Agent Instruction label: This labels shall be attached on the front of the cylinders and at
same height. The purpose of the label is to provide filling information, transport/safety in-
formation, inspection information and general precautions to be taken during re-installation
of the cylinder.
• Agency Label: Label listing the approving agencies.
• Transport label: Commonly referred to as a banana label which is curved and located on
the cylinder shoulder
4-13.3 Selector Valves
Each selector valve shall be provided with a sign or label clearly stating the name of the
associated protected space to which the valve shall conveys the Agent.
4-13.4 Protected Enclosure
4-13.4.1 Access Doors
Doors leading to and from the protected area to be fitted with appropriate signs (P/N K4076-
2), or signs in local language with same text that comply with associated National Standards.
All doors from an area protected by a gaseous extinguishing system should open outwards and
be fitted with automatic door closing devices.
4-13.5 Warning Alarms
Audible and visual alarms to be provided within the protected space, such alarms shall continue
to operate after discharge until all appropriate action has been taken.
4-13.5.1 Pressure Relief Vents
Relief vent openings (except at high level) to display warning sign, “Vent for Inert Gas - Keep
Clear” (P/N 2172-0200).