TAP Test Plan
3
Keysight X8711A IoT Device Functional Test Solution User’s Guide
39
Signaling PER
This step must be placed as the child step of
This step acquires WLAN signaling PER after establishing WLAN link with
the following settings:
– Repeat
– DL Power (Range: (-73 + System Offset) ~ (-33 + System Offset)
dBm)
– PER Limit
– Packet Count
Advanced Settings:
– Packet Size (Range: 24 to 1400)
– Packet Interval (Range: 10 milliseconds to 10 000 milliseconds)
– Time Out (Range: 100 milliseconds to 2000 milliseconds)
This test step will only be
executed when the WLAN
link is successfully
established.
Measure WLAN Tx Power
This step must be placed as the child step of
This step measures the DUT’s WLAN transmit power according to the
lower and upper limits of power set.
Advanced Settings:
– Lower and Upper Trigger Power Level
Note: Set upper and lower trigger such that the DUT Tx Power will fall
within the range.
– Channel System Offsets
– Meas. Window Time: Maximum Window Time for signal acquisition
(in milliseconds)
– WLAN Channel
– Reading Count
– Gate Above or Below
Test Step and Description
Output
