TAP Test Plan
3
Keysight X8711A IoT Device Functional Test Solution User’s Guide
31
Test Step and Description
Output
BLE Device Discovery
This step must be placed as the child step of
are two modes available.
In
System Scan mode
, the
Bluetooth
®
LE radio starts scanning for
devices, and return with a list of devices when more than one device is
discovered (as shown below). Hence, it is recommended to shield your
device to prevent interference. Select your device and click
OK
to begin
the test.
Choosing
System Scan mode
will continue to verify the PER mode
your DUT supports, and list them in Results. The four PER modes are:
– Active Scan
– Connect Request
– Active Scan and Connect Request
– None (NoPER)
In
User Entry mode
, the radio scans for the device based on MAC
address user input.
– This test step will report Pass only when a device is selected or
discovered based on the choice of mode.
– Successful connection will auto populate the device’s MAC Address in
Message.
Successful run will show:
Verdict
– Pass: A device selected
or device detected
(for User Entry mode).
– Fail: No device selected
or the device does not
support any PER mode.
Message
– MAC Address of device.
NOTE
Select the ‘Show and save discovered devices’ check box to save the list of
devices detected in System Scan and User Entry modes.
