TAP Test Plan
3
Keysight X8711A IoT Device Functional Test Solution User’s Guide
37
Overview of WLAN Signaling Test Plan
The table below contains descriptions and output for each test steps as listed in
the pre-configured WLAN Signaling test plan.
NOTE
This test plan requires the
or
license.
Test Step and Description
Output
Initialize WLAN Radio
This step must be placed first when performing WLAN related test to
initialize the radio.
Initialize WLAN Signaling
This step must be placed as the child step of
This step initializes WLAN profile for Signaling PER test based on the
following settings.
– WLAN role: Access Point or Station
– Network SSID with maximum length of 32 characters
– Security Type (Open, WEP, and WPA2)
– Security Key (Required for WEP and WPA2 only)
– Region: US, Japan or Europe
– RF Path: Dynamic, Uplink, and Downlink
– Channel: 1 to 11 (US), 1 to 14 (Japan), and 1 to 13 (Europe)
