Keysight PD1000A Power Device Measurement System Startup Guide
45
IV and CV Test Requirements
IV and CV Device Characterization
Enable Temperature Regulation Loop
To set up the temperature regulation loop, you need to install two applications
that retrieve the sensor temperature information. This section uses the two
Temperature Sensor files that you downloaded to a memory stick. (See
“Download Setup and Configuration Files” on page 19.)
1
For the B1506A, insert the memory stick into the front panel.
2
In the tabs at the left, select
Application Test.
3
Then select
Library > Import....
4
Locate and click on both the
Temperature Sensor 1.xtd
and the
Temperature
Sensor 2.xtd
files. This opens and installs the test definitions in the Utility
category.
Congratulations, your power device analyzer and EasyEXPERT are
now configured!
This completes the one-time setup.
Figure 18
Temperature Sensor 1 and 2 Applications
Summary of Contents for PD1000A
