Keysight PD1000A, Startup Manual

Page: 16 / 108

14 Keysight PD1000A Power Device Measurement System Startup Guide
Step1: Gather All PD1000A Required Equipment
–
Optional InTEST Thermal Platform model HP289-PM. Available separately,
contact:
www.inTESTthermal.com . (not orderable from Keysight)
-- Requires qty. 1, PD1000A Option GTW: Keysight E5810B
LAN/GPIB/USB Gateway (for use with InTEST Thermal Platform)
-- Requires qty. 1 GPIB Cable. When ordering the PD1000A, select
optional GPIB cable (0.5 m to 8.0 m).
PD1000A Hardware Documentation
Each instrument comes complete with its own documentation, an appropriate
power cord for your location, and other cables or accessories. For detailed
information about any of the instruments listed above, refer to the
documentation provided with the instrument.
This PD1000A Getting Started Guide is the only system documentation. All
PD1000A documentation and individual instrument documentation are available
on-line. Refer to the individual Keysight instrument documentation and help files
for operation and use instructions as well as specific warranty and support
information.
www.keysight.com/find/PD1000A (for general product information
including the PD1000A Bias T networks and the PD1000A Test Fixtures,
the PD1000A Control Software, etc.)
www.keysight.com/find/B1506A Power Device Analyzer/Curve Tracer
www.keysight.com/find/B1505A Power Device Analyzer/Curve Tracer
www.keysight.com/find/B2902A Precision Source/Measure Unit
www.keysight.com/find/E5080A ENA Vector Network Analyzer
www.keysight.com/find/E5810B LAN/GPIB Gateway
What is not Supplied
–
An HP289-PM Thermal Platform (Hot Plate) including Controller is
required for thermal device testing. (The B1505A requires the Keysight
N1265A text fixture to work with the InTEST platform.) The HP289-PM is
sold separately by InTEST Corp. Contact:
www.inTESTthermal.com
– Dedicated host computer. See System Requirements on page 11
– 5-port (minimum) LAN Switch
– Quantity 5, standard CAT5e LAN cables
Keysight recommends that you always check for and use the
latests instrument firmware and software revisions available on
the Keysight product websites.