manualshive.com logo in svg

Keysight N5227B, Service Manual

The Keysight N5227B is a high-performance network analyzer designed for precision measurements. Ensure optimal operation of your device with the Service Manual, available for free download from manualshive.com. This detailed manual provides step-by-step instructions for troubleshooting and maintenance, ensuring your equipment performs at its best.

Share
Download
background image

6                                                                                                                       Keysight N5227B Service Guide

Contents

Synthesized Source Group Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
A4, A15, and A17 13.5 GHz Synthesizer Boards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
A5 and A10 26.5 GHz Source Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
A7, A8, A12, and A13 50 GHz Doubler Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
A56, A57, A58, and A59 70 GHz Doubler Boards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
A25 Multiplier/Amplifier 26.5 Board (HMA26.5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
A14 Frequency Reference Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
A23 Test Set Motherboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
A70 4-Port and A75 2-Port Low Frequency Extension (LFE) Board. . . . . . . . . . . . . . . . 5-20

Signal Separation Group Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31

Configurable Test Set  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
A29–A32 Receiver Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
A33–A36 Test Port Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
A38–A41 60-dB Source Step Attenuators and A471–A45 Bias Tees (Optional) . . . . . . 5-36
A42–A45 60-dB Source Step Attenuators and A71–74 Bias Tee Combiners (Optional). . . .

5-36

Receiver Group Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37

A46–A49 35-dB Receiver Step Attenuators (Optional)  . . . . . . . . . . . . . . . . . . . . . . . . . 5-37
A37 Reference Mixer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37
A27 and A28 Mixer Bricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37
A24 IF Multiplexer Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38
A16 SPAM Board (Analog Description) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39

Digital Processing and Digital Control Group Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42

Front Panel Subgroup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44
Data Acquisition and Processing Subgroup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45

Power Supply Group Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47

6. Replaceable Parts

Information in This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Chapter Six at-a-Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Assembly Replacement Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Rebuilt-Exchange Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Replaceable Parts Listings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Front Panel Assembly, Front Side, All Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Front Panel Assembly, Back Side, All Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Top Assemblies and Cables, All Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17
2-Port Configuration, Option 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23
2-Port Configuration, Option 201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-29
2-Port Configuration, Option 205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-36

Summary of Contents for N5227B
































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N5227B

Icare PRO Quick Manual preview
PRO
Brand: Icare Pages: 3
4iiii PRECISION Firmware Upgrade Instructions preview
PRECISION
Brand: 4iiii Pages: 3
Keithley 6430 Quick Results Manual preview
6430
Brand: Keithley Pages: 48
dacell DN-10 User Manual preview
DN-10
Brand: dacell Pages: 22
MadMan EMS-3 Operating Manual preview
EMS-3
Brand: MadMan Pages: 37
MADDALENA microCLIMA U Installation And Operating Instructions preview
microCLIMA U
Brand: MADDALENA Pages: 5
T&D TR7 Series Introductory Manual preview
TR7 Series
Brand: T&D Pages: 2
T&D TR7 Series Quick Start Manual preview
TR7 Series
Brand: T&D Pages: 2
Keithley 610C Instruction Manual preview
610C
Brand: Keithley Pages: 44
Keithley 2651A User Manual preview
2651A
Brand: Keithley Pages: 76
Keithley 4200-SCS Startup Manual preview
4200-SCS
Brand: Keithley Pages: 12
Keithley 194 Instruction Manual preview
194
Brand: Keithley Pages: 281
Didactum Monitoring System 500 II DC Quick Start Manual preview
Monitoring System 500 II DC
Brand: Didactum Pages: 2
FISCHER ME49F Series Operating Manual preview
ME49F Series
Brand: FISCHER Pages: 20
Konica Minolta SKR 4000 User Manual preview
SKR 4000
Brand: Konica Minolta Pages: 92
Magnescale DF830SLR Instruction Manual preview
DF830SLR
Brand: Magnescale Pages: 2
OHAUS MB27 Instruction Manual preview
MB27
Brand: OHAUS Pages: 64
Würth 0715 53 325 Translation Of The Original Operating Instructions preview
0715 53 325
Brand: Würth Pages: 28

Brands by name

Popular brands

Load more brands