Keysight N5227B, Service Manual

Page: 395 / 415

Keysight N5227B Service Guide 7-77
Repair and Replacement Procedures
Post-Repair Procedures
A18 system motherboard No adjustment needed Front Panel Keypad and RPG Test
and A3 Display Test in
Chapter 4
The Operator’s Check
A19 midplane board No adjustment needed None needed
A20 power supply assembly No adjustment needed None needed
A21 CPU board No adjustment needed The Operator’s Check
A22 GPIB board No adjustment needed None needed
A23 test set motherboard Reinstall the serial number. (Refer to
“Installing or Changing a Serial
Number” in Chapter 8 .)
Re-enable all hardware options. (Refer
to “Software Entitlement
Certificate” in Chapter 8 .)
The Operator’s Check
A24 IF multiplexer board Source Adjustment
IF Gain Adjustment
Receiver Characterization
Receiver Adjustment
IF Response Adjustment
(Available Only with Option
S93093/4A/B and or
S93900/1/2/4/5/7A/B Installed)
The Operator’s Check
A25 HMA26.5 EE Default Adjustment : LO Drive
only
EE Default Adjustment : LO Drive
Noise Figure only (Option 029 equipped
PNA)
Source Adjustment
IF Gain Adjustment
Receiver Characterization
Receiver Adjustment
IF Response Adjustment
(Available Only with Option
S93093/4A/B and or
S93900/1/2/4/5/7A/B Installed)
Frequency Accuracy Test
Source Power Accuracy Test
Source Maximum Power Output
Test
Source Power Linearity Test
The Operator’s Check
A26 splitter Source Adjustment
IF Gain Adjustment
Receiver Characterization
Receiver Adjustment
IF Response Adjustment
(Available Only with Option
S93093/4A/B and or
S93900/1/2/4/5/7A/B Installed)
Frequency Accuracy Test
Source Power Accuracy Test
Source Maximum Power Output
Test
Source Power Linearity Test
The Operator’s Check
Table 7-2 Related Service Procedures (Continued)
Replaced Assembly
Adjustments
and Other Procedures
Verification, Performance,
and Other Tests and Procedures