Keysight N5227B Service Manual Download Page 201

Page: 201 / 415

Keysight N5227B Service Guide 6-17

Replaceable Parts
Replaceable Parts Listings

Top Assemblies and Cables, All Options

Top Assemblies, All Options

Reference

Designator

Part Number

Qty

Description

N5240-60074

Was N5242-60150

13.5 GHz (source 1) synthesizer board

5087-7780

26.5 GHz source (1) board

Not used.

5087-7346

40 GHz doubler assembly port 1

5087-7346

40 GHz doubler assembly port 2

Not used.

A10

5087-7780

26.5 GHz source (2) board (On 2-port models, this assembly is

included only with Option 224.)

A11

Not used.

A12

5087-7346

40 GHz doubler assembly port 3

(On 2-port models, assembly A12 is included only with Option 224.)

A13

5087-7346

40 GHz doubler assembly port 4

(On 2-port models, assembly A13 is included only with Option 224.)

A14

N5240-60069

Was N5240-60061

Frequency reference board

A15

N5240-60074

Was N5242-60150

13.5 GHz (LO) synthesizer board

A16

N5240-60077

Was N5240-60056

Signal Processing ADC Module (SPAM) board

A17

N5240-60074

Was N5242-60150

13.5 GHz (source 2) synthesizer board (On 2-port models, this

assembly is included only with Option 224.)

A18

N5247-60002

System motherboard

A19

W1312-60095

Midplane board

A20

0950-4934

Power supply

A21

W1312-60211

Was:W1312-60210

CPU board assembly, 2.2 GHz

A22

N5240-60059

GPIB board

A55

N5242-60134

Solid state drive (SSDA) for Windows 7 Operating System - to be

used with the 2.2 GHz CPU board W1312-60211, System CPU
Version 7

N8985A

Solid state drive (SSD) for Windows 10 Operating System - to be used
with the 2.2 GHz CPU board W1312-60211, System CPU Version 7

➀

1420-0356

Battery, lithium manganese dioxide, 3V, 0.22A-hr.

a. For the latest information on CPUs and associated drives, visit na.support.keysight.com/pna/hdnumbers.html.

b. The A55 solid state disk drive is located inside the A21 CPU board assembly. Refer to

“Removing and Replacing the

A55 Solid State Drive (SSD)” on page 7-52

for an illustration.

Summary of Contents for N5227B
































































































































































































































































































































































































































Search results

Summary of Contents for N5227B

Reviews:

Related manuals for N5227B

Brands by name

Popular brands

Keysight N5227B, Service Manual

Search results

Summary of Contents for N5227B

Reviews:

Related manuals for N5227B

Brands by name

Popular brands