Keysight N5227B Service Guide 6-125
Replaceable Parts
Replaceable Parts Listings
N5247-00008
1
Test set front plate (2-port models with front-panel jumpers.)
N5227-00001
Test set front plate (2-port models without front-panel jumpers.)
N5247-00009
1
Test set front plate (All 4-port models.)
N5247-00003
1
Bracket, front, bottom side - for semi rigid cables connecting to top assemblies
0515-0374
--
Machine screw M3.0 x 10 pan head (To attach: cross bracket to test set deck;
bracket to test set deck; cable bracket mounts to test set deck; side braces to
chassis & to attenuator/receiver couplers.)
0515-1521
--
Machine screw, M3.0 x 5, flat head (To attach front-panel LED boards.)
2190-0016
2
Lock washer (For bulkhead connector) (2-ports models only)
5065-4673
12/24
Bulkhead connector, 1.85 mm, f-f, 50-ohm (qty 12 for 2-port, qty 24 for 4-port)
1250-3310
12/24
Lock washer (for bulkhead connectors) (qty 12 for 2-port, qty 24 for 4-port)
1250-3516
12/24
Hex nut (for bulkhead connectors) (qty 12 for 2-port, qty 24 for 4-port)
Not
shown
0515-1038
--
Machine screw M3.0 x 20 pan head (To attach mixer bricks to mounting block.)
0403-0285
4
Bumpers, adhesive (Installed on test port couplers in 2-port models only.)
1400-1334
--
Cable clamp (with adhesive backing)
0403-0179
4
Gap pad (Between each receiver coupler and test set deck)
E4403-20033
4
Gap pad (Between receiver couplers 1 & 3 and 2 & 4.
0460-2725
2
Vibe mount, 4-port (Between port 1 & port 2 couplers & test set front sub panel.)
Not
shown
0515-0669
--
Machine screw, M4.0 x 0.7, pan head (To attach A24 IF MUX to test set deck.)
N5242-00019
1
Stabilizer bracket (Between A23 test set motherboard and A24 IF mux board.)
N5247-00017
1
Cross bracket on test set deck
Ref Desig
Part Number
Qty
Description
22
23
24
25
26
27
28
29
