Keysight N5227B Service Manual Download Page 195

Page: 195 / 415

Keysight N5227B Service Guide 6-11

Replaceable Parts
Replaceable Parts Listings

Front Panel Assembly, Front Side, All Options

The N5240-60071 front panel assembly contain the items shown in the

following table.

Reference

Designator

Part Number

Qty

Description

➀

N5240-20089

Front frame, machined, 1-piece, 2-port (frame only, not the assembly)

(Requires: Lower front panel overlay. See below.)

N5247-20141

Front frame, 4-port (frame only, not the assembly)

8160-0660

1.2 m

RFI gasket material, 1.2 meters in length

(Must be ordered separately from front frame.)

➁

0515-2044

Machine screw, M4.0 x 12 flat head (To attach front frame to chassis.)

➂

5041-7908

Trim strip, filler (For analyzers with handles.)

➃

N5240-80040

Keypad overlay

➄

N5227-80023

Lower front panel overlay, 2-port (Option 200)

N5227-80028

Lower front panel overlay, 2-port (Option 201and Option 219)

N5227-80030

Lower front panel overlay, 2-port (Option 205 and Option 220)

N5227-80025

Lower front panel overlay, 2-port (Option 210)

N5227-80024

Lower front panel overlay, 4-port (Option 400)

N5227-80005

Lower front panel overlay, 4-port (Option 201 and Option 219)

N5227-80026

Lower front panel overlay, 4-port (Option 410)

N5227-80027

Lower front panel overlay, 4-port (Option 401 and Option 419)

N5242-80031

Lower front panel overlay, 4-port (Option 405 and 420)

➅

W1312-40180

Front (RPG) knob

➆

N5227-80016

Nameplate

N5227-80029

Nameplate, LFE

➇

N5240-00010

Lower Dress Panel, 2-Port (ALL PNA models). Goes on, before lower front
panel overlay (

➄

). Attach with 0515-1946 subpanel screws.

N5240-00009

Lower Dress Panel, 4-Port (ALL PNA models). Goes on, before lower front
panel overlay (

➄

). Attach with 0515-1946 subpanel screws.

➈

N5240-40002

Trim, bottom, goes on the outside, underneath the Front Frame frame (

➀

(All PNA models)

➉

0515-1946

Machine screw, M3 x 6 mm flat head (To attach lower dress panel overlay

frame to chassis.)

Summary of Contents for N5227B
































































































































































































































































































































































































































Search results

Summary of Contents for N5227B

Reviews:

Related manuals for N5227B

Brands by name

Popular brands

Keysight N5227B, Service Manual

Search results

Summary of Contents for N5227B

Reviews:

Related manuals for N5227B

Brands by name

Popular brands