Keysight InfiniiMax III+ Series, User Manual

Page: 3 / 162

3
Contents
1 Using InfiniiMax III+ Series Probes 5
Inspecting the Probe and Its Accessories 6
Introduction 9
Compatible Oscilloscopes 15
To Avoid Damaging the Probe 16
To Ensure Maximum Measurement Accuracy 21
To Use InfiniiMode 22
To Probe Ungrounded Devices 25
To Probe Single-Ended Signals with a Differential Head 26
To Measure Small Signals on a Large DC Level 27
Slew Rate Requirements for Different Technologies 30
Available Accessories 32
Safety Information 34
Service 37
2 Using InfiniiMax III+ Probe Heads 39
Recommended Configurations at a Glance 40
N5444A InfiniiMax III 2.92 mm/3.5 mm/SMA Probe Head 42
N5439A InfiniiMax III ZIF Probe Head 45
N5445A InfiniiMax III Differential Browser Probe Head 51
N5441A InfiniiMax III Solder-In Head 57
N2836A InfiniiMode Solder-In Head 60
N2848A QuickTip InfiniiMode Probe Head 65
N2835A InfiniiMax III+ Differential Connectivity Kit and Accessories 69
Strain Relieving the Probe Heads 71
Soldering Tips 73
3 Maintaining Probe Heads 75
Replacing Axial Resistor Tips 76
Replacing N5441A Probe Head Wires 80
4 Calibration / Deskew Procedure 85
Procedure 86