Keysight InfiniiMax III+ Series, User Manual

Page: 15 / 162

Using InfiniiMax III+ Series Probes
1
InfiniiMax III+ Series Probes User’s Guide 15
Compatible Oscilloscopes
The N2830/1/2A probe’s precision BNC AutoProbe I interface connects directly to
S-series and 90000A oscilloscopes. Use an N5442A adapter to connect to series
90000 Q, V, X, and Z-series Infiniium oscilloscopes. Use an N1022B adapter to
connect to the 86100D oscilloscope.
The N7000/1/2/3A probe’s AutoProbe II interface connects directly to series
90000 Q, V, X, and Z-series Infiniium oscilloscopes. Use an N5477A adapter to
connect to the 86100D oscilloscope.
The N2830/1/2A and N7000/1/2/3A probes are
not compatible with Infiniium
9000 Series, InfiniiVision and any old generation Keysight, Agilent, or HP
oscilloscopes.
Is your oscilloscope software up-to-date?
Keysight periodically releases software updates to support your probe, fix known
defects, and incorporate product enhancements. To download the latest firmware,
go to www.Keysight.com and search for your oscilloscope’s model number. Click
on the “Drivers, Firmware & Software” tab under the Technical Support link.
86100C/D sampling oscilloscope
The probes can be used with the 86100C/D sampling scope with degraded
performance, depending on the probe head used. Use only in differential 1x mode
(10:1 attenuation). For N2830/1/2A probes, use the N1022B adapter. For
N7000/1/2/3A probes, use the N5477A adapter.
Table 2 N2830A-Series Probes and Compatible Infiniium Oscilloscopes
Oscilloscope Adapter Required Minimum Required Firmware
Version
90000 Q, V, X, and Z-Series N5442A 5.00
90000A Series none 5.00
S-Series none 5.00
86100C/D Series N1022A/B —
Table 3 N7000A-Series Probes and Compatible Infiniium Oscilloscopes
Oscilloscope Adapter Required Minimum Required Firmware
Version
90000 Q, V, X, Z-Series none 5.50
86100C/D Series N5477A —