Keysight InfiniiMax III+ Series, User Manual

Page: 13 / 162

Using InfiniiMax III+ Series Probes
1
InfiniiMax III+ Series Probes User’s Guide 13
AutoProbe Interface Connectors
Figure 7 and Figure 8 show the AutoProbe interface connectors that connect the
probes to the oscilloscope. The N2830/1/2A probes use the AutoProbe I interface
which connects to precision BNC oscilloscope channel inputs. It is compatible with
Infiniium oscilloscopes such as the 90000A and S-series. Of course, the probe
model must be also supported by the oscilloscope software.
The N7000/1/2/3A probes use the AutoProbe II 3.5 mm interface, which is
compatible with 90000 Q/V/X/Z-series oscilloscopes without the use of an
adapter
Figure 7 N2830/1/2A’s AutoProbe I Interface Connector
Figure 8 N7000/1/2/3A’s AutoProbe II Interface Connector