Keysight InfiniiMax III+ Series, User Manual

Page: 43 / 162

Using InfiniiMax III+ Probe Heads
2
InfiniiMax III+ Series Probes User’s Guide 43
N5448B Coaxial Phase Matched Cable Pair
For extending the cable length of the N5444A InfiniiMax III probe head and add flexibility
and convenience to the probing setup, you can order N5448B 10 inches (25 cm) long
coaxial phase matched cable pair. This cable pair supports 2.92 mm male-to-2.92 mm
male connection.
Figure 23 N5448B Coaxial Phased Matched Cable Pair
Before connecting these cables to the N5444A probe head, you must first remove the
supplied rigid cables of the N5444A probe head. Figure 24 on page 43 shows the N5448B
cables attached to the N5444A probe head.
Figure 24 N5444A Probe Head With N5448B Cables Attached
NOTE
For performance plots, refer to Chapter 6 , “Performance Plots.
CAUTION
The maximum bend radius for the N5448B coaxial cable pair is 30 mm. Bending these
cables at too tight a radius or twisting the cables can cause damage, reduce
performance, and impact the precision of these cables.
Also, ensure that the plastic caps that are provided with these cables are installed
when the cables are not in use.