62
InfiniiMax III+ Series Probes User’s Guide
2
Using InfiniiMax III+ Probe Heads
Figure 47
Probe Head Connection to DUT (
Non-InfiniiMode
)
Ensuring maximum performance
The specifications and performance plots of the N2836A probe head were
measured with a nominal spacing of 40 mil (1 mm). In order to achieve the proper
response as shown in the performance plots, keep the mini-axial lead
resistors
roughly parallel as shown in
, and use the tip wires on the mini-axial
leads to get the desired span.
Figure 48
Proper Position of Resistors
If you need to position the mini-axial lead resistors different than shown in this
figure (that is, resistor bodies close together or spread way apart), use N2807A
and N2808A PrecisionProbe products to perform an AC calibration of the probe.
Summary of Contents for InfiniiMax III+ Series
