Troubleshooting the Test Set
If the U3024AH10 is not operating properly, use the following procedures to isolate and repair
the type of failure encountered. It is recommended that a qualified service technician perform
the following procedures.
Refer to the Keysight PNA Series: Service & Support Home Page at:
http://na.tm.keysight.com/pna
for further information.
To request service, please contact your local service center. In the US, call 800-829-4444. For
a listing of service centers worldwide, please visit us at
www.keysight.com/find/service
.
When sending the Test Set in for repair, please also send your PNA and cables. This will allow
us to verify proper operation of the complete system, and speed your repair
turn-around time. Refer to
“Keysight Support, Services, and Assistance” on page 99
No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock do not remove covers.
Fan is not Operating
Suspect a power supply problem or failed fan, and perform the following troubleshooting.
The opening of covers or removal of parts is likely to expose the user to
dangerous voltages. Disconnect the instrument from all voltage sources
before being opened.
1. Verify the front panel power switch (3101-4058) is operational.
2. Verify that the AC line voltage is correct (100 to 240 V at 50/60 Hz) and that the power cord is
not damaged. If the power cord is damaged, replace it. If the AC line voltage is incorrect, use
another receptacle.
3. Verify that the fuse (2110-0709) in line module is not blown. There is a spare fuse in the line
. If the fuse is working, continue to step 4.
4. Remove the top cover. Verify that the supply LED indicators, on the test set control board
(N5261-60006) are illuminated (Figure 61 below). The +9 and +10 V supplies will not be on. If
the LEDs are illuminated, replace the fan (87050-60027). Refer to
Figure
61
DC Power LEDs
81
Keysight U3024AH10 User's and Service Guide
Summary of Contents for U3024AH10
