Keysight Technologies U3024AH10, User'S And Service Manual

Page: 9 / 106

Verifying the Shipment
To verify the contents shipped with your product, refer to the “Box Content List” included with
the shipment.
Inspect the shipping container. If the container or packing material is damaged, it should be
kept until the contents of the shipment have been checked mechanically and electrically. If there is
physical damage, refer to
“Contacting Keysight” on page 99 . Keep the damaged shipping
materials (if any) for inspection by the carrier and an Keysight Technologies representative.
Network Analyzer Requirements
All network analyzers require Option 551 to be installed for multiport operation (N-Port error
correction and measurement capability). Table 2 provides a listing of other network analyzer
option requirements. In order for the measurement system to cover the full frequency range of the
Test Set option listed, the network analyzer's frequency range should equal or exceed that of the
Test Set.
Table 2 PNA-X Configuration Requirements
4-Port Network Analyzer
u3024ah10_pnax_p4.tsx
Test Set File
* The image shows two Test Sets configured in a 24-Port measurement system.
u3024ah10_x2_pnax_p4.tsx
System Figure Options
N5224/25A/B
N5244/45A /B
400
1
2
*
The Test Set files indicated in Table 2 above must be installed into this network analyzer file
directory location: c:/Program Files/Agilent/Network Analyzer/testsets .
Ensure the network analyzer has the latest version of firmware installed. The following website link
will provide the necessary information:
http://na.support.keysight.com/pna/firmware/firmware.html .
Definitions
•
Specifications describe the performance of parameters covered by the product warranty
(temperature –0 to 55 °C, unless otherwise noted.)
•
Typical describes additional product performance information that is not covered by the
product warranty. It is performance beyond specification that 80% of the units exhibit with a
95% confidence level over the temperature range 20 to 30 °C. Typical performance does not
include measurement uncertainty.
•
Nominal values indicate expected performance or describe product performance that is
useful in the application of the product, but is not covered by the product warranty.
•
Characteristic Performance describes performance parameter that the product is expected to
meet before it leaves the factory, but is not verified in the field and is not covered by the
product warranty. A characteristic includes the same guard bands as a specification.
Keysight U3024AH10 User's and Service Guide 4