38
Upgrade kits for the PNA-X N5242A
Upgrade kits are available to add options after initial purchase.
To order an upgrade kit for the PNA-X, order the analyzer’s model
number followed by a “U”, then indicate the option to be added (exam-
ple: N5242AU-010). The model and serial numbers of the instrument
to be retrofitted are required as part of the order.
–
Pulse measurements
(Option H08)
User installable.
–
Time-domain
(Option 010)
User installable.
–
Add IF inputs for antenna and millimeter-wave
(Option 020)
User installable.
–
Add pulse modulator to internal 1
st
source
(Option 021)
User installable.
–
Add pulse modulator to internal 2
nd
source
(Option 022)
User installable. Option 224 or 400 required.
–
Add four internal pulse generators
(Option 025)
User installable.
–
Frequency offset
(Option 080)
User installable.
–
Scalar-calibrated converter measurements
(Option 082)
User installable. Option 080 required, and can not be ordered with
Option 083.
–
Frequency converter measurements
(Option 083)
User installable. Option 080 required, and can not be ordered with
Option 082.
–
Embedded LO measurements
(Option 084)
User installable. Options 080 and 083 required. Requires
firmware A.07.50 and above.
–
Gain compression application
(Option 086)
User installable. Requires firmware A.08.00 and above.
–
N-port capabilities
(Option 551)
User installable.
–
Perpetual license for built-in performance test software for
Keysight inclusive calibration
(Option 897)
User installable. Additional hardware required.
–
Perpetual license for built-in performance test software for
standards compliant calibration
(Option 898)
User installable. Additional hardware required.
–
2 ports, extended power range and bias-tees
(Option 921)
Applicable to 2-port model only (N5242A-200). This upgrade adds
one 65 dB source attenuator, one 35 dB receiver attenuator, and one
bias-tee to each test port. Includes installation at a Keysight service
center. Option 200 required.
–
2 ports, add an internal 2
nd
source, a combiner & mechanical
switches
(Option 922)
Applicable to 2-port models only (N5242A-200, N5242A-219). This
upgrade adds an internal second source, a combiner and mechan-
ical switches. Access to the second source is available through two
output (SMA) connectors on the front panel. Includes installation at
a Keysight service center. Options 200, 219 and 080 required.
–
Fully corrected noise figure measurements, 2-port
(Option 924)
Adds fully-corrected noise figure measurements to 2-port
analyzer. Includes installation at a Keysight Service Center. Option
219 or 224 required.
–
4 ports, extended power range and bias-tees
(Option 926)
Applicable to 4-port model only (N5242A-400). This upgrade adds
one 65 dB source attenuator, one 35 dB receiver attenuator, and one
bias-tee to each test port. Includes installation at a Keysight service
center. Option 400 required.
–
4 ports, add an internal combiner & mechanical switches
(Option
927)
Applicable to 4-port models only (N5242A-400, N5242A-419).
This upgrade adds a combiner and mechanical switches. Includes
installation at a Keysight service center. Options 400, 419 and 080
required.
–
Fully corrected noise figure measurements
, 4-port (Option 929)
Adds fully-corrected noise figure measurements to 4-port
analyzer. Includes installation at a Keysight Service Center. Option
419 or 423 required.
N5242A PNA-X upgrade path
2-port
4-port
200
219
224
400
419
423
921
922
926
927
200
219
224
400
419
423
