Keysight Technologies PNA E8361A Configuration Manual Download Page 34

Page: 34 / 40

General Accessories

USB

–

N4688A

CD-ROM drive

Provides an external read/write CD-ROM drive with a USB cable.

–

N4689A

USB hub

Provides a USB hub for connecting additional USB peripherals.

Hard drive

–

N8980A

spare hard drive

For use with 500 MHz Pentium III CPU board

Recommended for use in secure environments.

–

N8981A

spare hard drive

For use with 1.1 GHz Pentium M CPU board

Recommended for use in secure environments.

Probe

–

85024A

high-frequency probe

Provides high-impedance in-circuit test capability from 300 kHz to
3 GHz.

Power meters and sensors

Recommended for self support, adjustments and perfor-
mance tests to verify proper instrument operation.

–

U2000A

USB power sensor, 10 MHz to 18 GHz

–

U2001A

USB power sensor, 10 MHz to 6 GHz

–

U2002A

USB power sensor, 50 MHz to 24 GHz

–

U2004A

USB power sensor, 9 kHz to 6 GHz

–

E4418B

single-channel power meter

–

E4419B

dual-channel power meter

–

8481B

power sensor, 10 MHz to 18 GHz, Type-N (m), 25 W

–

8481A

power sensor, 10 MHz to 18 GHz, Type-N (m), 100 mW

–

8485A

power sensor, 50 MHz to 26.5 GHz, APC-3.5 mm (m), 100 mW

–

8487A

power sensor, 50 MHz to 50 GHz, 2.4 mm, 300 mW

–

8487D

power sensor, 50 MHz to 50 GHz, 2.4 mm, 100 mW

–

R8486A

power sensor, 26 GHz to 40 GHz, waveguide flange

UG-599/U, 100 mW

–

Q8486A

power sensor, 33 GHz to 50 GHz, waveguide flange

UG-383/U, 100 mW

–

U8486A

power sensor, 50 GHz to 75 GHz, waveguide flange

UG-385/U, 200 mW avg

–

E4412A

CW power sensor, 10 MHz to 18 GHz, Type-N (m), 200 mW

–

E4413A

CW power sensor, 50 MHz to 26.5 GHz, 3.5 mm, 200 mW

Amplifiers

–

83006A

power amplifier, 10 MHz to 26.5 GHz, 20 dB gain, power

out: +18 dBm to 10 GHz or +16 dBm to 20 GHz or +14 dBm to 26.5
GHz

–

83017A

power amplifier, 50 MHz to 26.5 GHz, 25 dB gain, power

out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz

–

83018A

power amplifier, 2 to 26.5 GHz, 27 dB gain to 20 GHz or

23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz or +21 dBm to
26.5 GHz

–

83020A

power amplifier, 2 to 26.5 GHz, 30 dB gain to 20 GHz or

27 dB to 26.5 GHz, power out: +30 dBm to 20 GHz or +26 dBm to
26.5 GHz

–

83050A

power amplifier, 2 to 50 GHz, 23 dB gain, power out:

+20 dBm to 40 GHz or +17 dBm to 50 GHz

–

83051A

power amplifier, 45 MHz to 50 GHz, 23 dB gain power out:

+12 dBm to 45 GHz or +10 dBm to 50 GHz

Couplers

–

87300B

coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB coupling

–

87300C

coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB coupling

–

87301B

coaxial coupler, 10 to 46 GHz, 2.92 mm (f), 10 dB coupling

–

87301D

coaxial coupler, 1 to 40 GHz, 2.4 mm (f) or optional

2.92 mm (f), 13 dB coupling

–

87301E

coaxial coupler, 2 to 50 GHz, 2.4 mm (f), 10 dB coupling

–

87310B

90 ° coaxial coupler, 1 to 18 GHz, SMA (f), 3 dB coupling

Equipment rack accessories

–

E3663AC

Rail kit

–

5063-9217

Rack mount kit, for use without handles (included with

Option 1CM)

–

5063-9205

Front handle kit

–

5063-9224

Rack mount kit with handles

–

5063-9237

Rack mount kit, for use with standard supplied handles

(included with Option 1CP)

1. The 500 MHz CPU board has one USB port oriented vertically and a single GPIB

port. The 1.1 GHz CPU board has four USB ports and two GPIB ports. For more

information on this subject, refer to

http://na.support.keysight.com/pna/hdnum-

bers.html

2. For the latest guide to power meters and power sensors, refer to the Keysight web

site:

www.keysight.com/find/powermeters

3. Front handles and Option 1CP (rack mount with handles) are not available for the

N5242A.

Summary of Contents for PNA E8361A









































Search results

Summary of Contents for PNA E8361A

Reviews:

Related manuals for PNA E8361A

Brands by name

Popular brands

Keysight Technologies PNA E8361A, Configuration Manual

Search results

Summary of Contents for PNA E8361A

Reviews:

Related manuals for PNA E8361A

Brands by name

Popular brands