18
Certification options
–
Commercial calibration certificate with test data (Option UK6)
Complete set of measurements which tests unit to manufacturer’s
published specifications. Includes calibration label, calibration
certificate, and data report. Conforms to ISO 9001.
–
ISO 17025 compliant calibration
(Option 1A7)
Complete set of measurements which tests unit to manufacturer’s
published specifications. Includes calibration label, ISO 17025
calibration certificate, and data report, measurement uncertainties
and guardbands on all customer specifications. Conforms to ISO
17025 and ISO 9001.
–
ANSI Z540 compliant calibration (Option A6J)
Complete set of measurements which tests unit to manufacturer’s
published specifications. Includes pre- and post-adjustment data
with measurement uncertainty information compliant to the ANSI/
NCSL Z540 standard.
Calibration
3 year calibration plans are available at time of instrument
purchase. Contact your local Keysight sales office for
details.
Product services
Keysight product services provide tailored assistance
related to a specific need or application. Product services
enable you to quickly learn how Keysight instruments
operate, their capabilities, and how to apply that knowledge
to achieve your specific measurement goals. PNA series
services available include:
– Remote scheduled productivity assistance
– 1 Day of start-up assistance
– Daily productivity assistance
– PNA operator training for 8 students at your business
site
– PNA operator web classes for 1 student
– Custom services to be qualified by an Keysight
technical consultant
E8361A/62B/63B/64B
Configuration Details
Selecting the correct mixer-test configuration
Most mixer or converter test applications require Options
014, 080, and 082 for conversion loss/gain, or Options 014,
080, 081 and 083 for conversion loss/gain and phase/delay
measurements. If you want to create and automate your
own custom frequency-offset measurements (for example,
intermodulation distortion), you may only need Options 014
and 080. For converters that require input power below
-27 dBm, or for devices that have a large amount of LO
feedthrough (like an unfiltered mixer), Option UNL, which
adds source attenuators, is highly recommended. Besides
allowing lower input power levels, these attenuators
improve the isolation between the PNA’s internal source
and LO leakage signals, helping to prevent source-unlev-
eled errors. For devices that put out signals near or above
the receiver’s compression levels (which varies between
–3 and +5 dBm, depending on the model and frequency),
Option 016 is recommended, which adds receiver attenua-
tors. Finally, Option 010, which adds time-domain analysis,
is very useful for gating out unwanted, time-delayed
responses which often occur when measuring mixers.
