ABORt Subsystem
Abort commands cancel any active transients and return the trigger system back to the Idle state.
Abort commands are also executed with the *RST command.
ABORt:ACQuire
ABORt:TRANsient
ABORt:ACQuire - Cancels any triggered measurements. It also resets the WTG-meas and MEAS-
active bits in the Operation Status registers.
ABORt:TRAN - Cancels any transients or Arbs. It also resets the WTG-tran and TRAN-active bits in the
Operation Status registers. Note that this command does not turn off continuous triggers if
INITiate:CONTinuous:TRANsient ON has been programmed. In this case, first turn off continuous
triggers before sending the ABORt command.
Parameter
Typical Return
(none)
(none)
Aborts the triggered measurement: ABOR:ACQ
Keysight N69100 Series Operating and Service Guide
153
5 SCPI Programming Reference
