Keysight B1542A User’s Guide, Edition 10
5-3
PLSDIV Test Definitions
Table 5-1
Summary of PLSDIV Test Definitions
For the DC I-V test definitions and the supported instruments, see Figure 4-1 on
page 4-13.
Test Definition
Description
This test definition must be executed after installing the pulsed IV test
system, changing channel assignment or GPIB address, or replacing
oscilloscope, cable, or bias-T.
Initializes the pulsed IV test system.
Controls SMU to apply the drain voltage, controls PGU to apply the gate
voltage pulse, controls the oscilloscope to monitor the gate voltage pulse
waveform and the drain voltage pulse waveform, calculates the drain current
pulse waveform if the drain monitor mode is current, and displays the gate
voltage pulse waveform and the drain voltage or current pulse waveform.
Controls SMU (source monitor unit) to apply the drain voltage, controls PGU
(pulse generator) to apply the gate voltage pulse, controls the oscilloscope to
monitor the gate voltage and the drain voltage, calculates the drain current,
and displays the Id-Vd characteristics.
Controls SMU to apply the drain voltage, controls PGU to apply the gate
voltage pulse, controls the oscilloscope to monitor the gate voltage and the
drain voltage, calculates the drain current, and displays the Id-Vg
characteristics.
,
For the DC Id-Vd measurement. Controls SMUs to apply the drain voltage
and the gate voltage, measures the drain current, and displays the Id-Vd
characteristics.
,
For the DC Id-Vg measurement. Controls SMUs to apply the drain voltage
and the gate voltage and measure the drain current, and displays the Id-Vg
characteristics.
For the DC IV sweep measurement. Controls SMUs to apply the primary and
secondary sweep voltage, measures current, and displays the I-V
characteristics.
Summary of Contents for B1542A Pulsed IV Package
