Keysight Technologies B1542A Pulsed IV Package, User Manual

Page: 45 / 160

Keysight B1542A User’s Guide, Edition 10 3-5
Performing System Setup and Compensation
Pulsed IV System Setup
Table 3-3 System Configuration Setup Parameters
Field name Description
Controller Select B1500A Internal or External PC .
Instrumentations PGU, DSO, and SMU Specify the pulse generator (PGU), oscilloscope (DSO),
and DC source monitor (SMU) to be used.
For DSO/MSO S series oscilloscope, set
DSO=
DSO9000A series .
Visa Name
a
a. To know the Visa Name, use Keysight Connection Expert. See Figure 3-1 or Figure 3-2 .
VISA interface ID of the GPIB interface. It must be
GPIB0
.
GPIB Address
b
b. To know the GPIB address of the instruments, use Keysight Connection Expert on the system
controller. Or see the manual of each instrument to know how to set the GPIB address.
PGU, DSO, and SMU Enter GPIB address of the pulse generator (PGU),
oscilloscope (DSO), and DC source monitor (SMU).
If Controller= B1500 Internal , SMU field is not active.
If DSO= DSO9000A series , DSO field is not active.
Option button Opens a dialog box. See “LAN Setup for DSO Control
Dialog Box” on page 3-10 .
CH Assignment Gate PGU CH Enter DSO channel number for Gate pulse output.
Gate Monitor DSO CH Enter DSO channel number for Gate voltage monitor.
Drain Monitor DSO
CH Enter DSO channel number for Drain voltage monitor.
Drain Bias SMU CH Enter SMU slot number for Drain voltage output.
SMU for Compensation button Opens a dialog box. See “SMU CH for Compensation
Dialog Box” on page 3-11 .