6-18
Keysight B1542A User’s Guide, Edition 10
PLSDIV TIS Commands
Command Reference
If this function is off, the
vd_set
value will be equal to the
vd
value specified by the
PlsdivForceVd command and the
vd_actual
value will show the value divided by
the shunt resistor.
Response
Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
PlsdivSetAdjustStat
This command enables or disables the automatic output adjustment of the specified
source, PGU (pulse generator) for the gate voltage or SMU (source monitor unit) for
the drain voltage.
Filename
PlsdivSetAdjustStat.exe
Write Type
String
Read Type
String. However, this command does not return any output parameter.
Write String
This command needs the following input parameters in this sequence.
term
Terminal. Numeric value, 0 (gate) or 1 (drain).
adj_stat
Function status. Numeric value, 0 (off) or 1 (on).
Response
Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
PlsdivSetAveraging
This command sets the oscilloscope averaging number for the pulsed IV
measurement. Large averaging number contributes high certainty of measurement
result and long measurement time.
Filename
PlsdivSetAveraging.exe
Write Type
String
Read Type
String. However, this command does not return any output parameter.
Write String
This command needs the following input parameter.
avg_num
Averaging number. Numeric value, 1 to 4096.
Summary of Contents for B1542A Pulsed IV Package
