Keysight B1542A User’s Guide, Edition 10
6-13
PLSDIV TIS Commands
Command Reference
PlsdivCutoffVd
This command applies 0 V drain voltage and sets the SMU output switch off.
Filename
PlsdivCutoffVd.exe
Response
Status code. Numeric value. To read error message, use PlsdivErrorMessage. If no
error is detected by this command execution, 0 is returned.
PlsdivCutoffVg
This command sets the PGU output switch off.
Filename
PlsdivCutoffVg.exe
Response
Status code. Numeric value. To read the error message, use PlsdivErrorMessage. If
no error is detected by this command execution, 0 is returned.
PlsdivErrorMessage
This command returns the error number and error message for the specified status
code. For the error code and message, see
“Status Code and Error Messages” on
.
Filename
PlsdivErrMessage.exe
Write Type
String
Read Type
String
Write String
This command needs the following input parameter.
status_code
Status code returned by a command. Numeric value.
Read String
This command returns the following output parameter.
message
Error message specified by the
status_code
parameter. The
message is a string up to 256 characters.
Response
Error number specified by the
status_code
parameter. Numeric value.
Summary of Contents for B1542A Pulsed IV Package
