Key Automation TELESCOPIC LEVANTE, Instructions And Warnings For Installation And Use

Page: 72 / 156

EN
72
After 60 seconds of inactivity the display returns to showing the
operating mode.
by pressing the
+
key it is possible to temporarily display the weight
class currently configured.
11.20 - Displays
By pressing the
ESC
key it is possible to view in sequence:
CTOT
The total number of cycles performed by the automation,
expressed in hundreds.
CPAR
The partial number of cycles performed by the automation,
ESC
MENU
OK
PROGRAM MENÙ
P5 P4
P1
P2
AS
POSE
Door position (in encoder counts)
CORS
Learned stroke (in encoder counts)
RALA
Learned opening approach space (expressed in encoder count)
RALC
Learned closing approach space (expressed in encoder count)
UBAT
Battery voltage (expressed in volts)
IMOT
Instantaneous current (in 1/100 amps) if the door is in motion. Max current of the last movement if the
door is stopped.
UMOT
Motor voltage (in volts)
SOGO
Obstacle current threshold (in 1/100 amps)
UERR
They are automatically displayed in sec. intervals. The codes of the last 16 errors that have occurred,
numbers from 1 the most recent to 16 the least recent.
TEMP
The temperature of the power electronics is displayed in vn degrees centigrade.
VACC
The supply voltage of the accessories is displayed in volts.
AUTS
This information is displayed every time parameters of the board are changed and the next two door
operations will re-check all the parameters.
n
n
n
expressed in hundreds: this counter can be reset by holding the
OK
button for two seconds until the sounding of an acoustic signal.
If the OK button is kept pressed while the display is off (until a
beep is heard), the ESC key can be used to view other particular
information in real time: