Key Automation TELESCOPIC LEVANTE, Instructions And Warnings For Installation And Use

Page: 43 / 156

43
EN
2 - INTRODUCTION TO THE PRODUCT
2.1 - Product description
2.2 - Technical specifications
1- 24V transformer unit
2- Motor unit
3- Control unit
4- Guide pulley with tensioner unit
1- Thrustbearing column
2- “L” thrustbearing bracket
3- Runner
4- Round belt guide
5- Mechanical limit switch
6- Runner
7- Right side cap
8- Left side cap
5- Round belt guide with belt tensioner
6- Fixed belt lock
7- Connecting bracket between the panels with movable belt lock
8
Power supply 230 Vac (+/- 10%) 50/60 Hz
Rated power 130 W
Electric lock voltage 12 Vdc, 5 W
Battery charger 27.6 Vdc max, I max = 350 mA max during charging
Electric motor 24 Vdc max power 80 VA
Recommended max. weight for panel 1+1 leaf 100+100 Kg; 2+2 leaves 70+70 + 70+70Kg
Opening speed Adjustable max 80 cm/s (for leaf in weight class “0”)
Closing speed Adjustable max 50 cm/s (for leaf in weight class “0”)
Opening pause time Adjustable from 0 to 60 seconds
Operating temperature from -20°C to +55°C
Protection rating IP 22
Crosspiece length max 7 m
Fuse 1 power line 15A blade fuse type AL
Auxiliary battery power supply fuse 15A blade fuse type AL
Accessories power outlet 28V max, with 500mA max
Use in highly acid, saline or explosive atmosphere NO
2.3 -
Wiring table
It is advisable to run the cables to the far right, looking at the automation box, with a cable excess of approximately 3 m.
Power supply 230V
Max length [m] Cable type
3 H05VV-F 3G1 mm²
Control inputs
Inputs Max length [m] Cable type
OPEN CLOSE
30 PVC LiYY 5x0.34mm²
START STOP
5
4 6
3 2 1
2 4 6 3 5 7
7
1
The motorised front beam consists of the following sub-assemblies:
The rear telescopic beam consists of the following sub-assemblies: