KERN PBJ-N, Service Manual

Page: 10 / 67

PBJ_N-SH-e-1810.docx 10
3.5 Overview of display
Display Designation Description
Indicates that the weighed value is stable. (*1) It marks the
currently selected element during menu element selection.
Tare symbol Informs about setting an initial tare value.
Weight symbol
It is displayed during adjusting the measuring range. It
indicates adjusting settings during menu selection. Flashes
prior to start of automatic adjustment.
Note:
If automatic adjusting of measuring range is not activated, a
user must perform it when this symbol flashes.

with built-in weight ( PBJ models refer to chapter
9.31.1)

with external weight ( PBS models refer to chapter
Fehler! Verweisquelle konnte nicht gefunden werden.
).
[ ]
Brackets
The non-calibrated value is given in brackets in calibrated
scales.
Number symbol Indicates numeric value entry.
Menu symbol
Appears during menu selection. Always shown when the
menu is locked.
Asterisk
Indicates that the displayed numeric value is not a mass
value.
Communication
symbol
Is lit up during communication with external appliances via
RS-232C cable. Shown when communication functions are
ON.
▼
Inverse triangle
symbol
Indicates the setting of specific weight measurement. It is
used as an alternative to the decimal point.
→0←
Zero indicator
Animal symbol Shows the setting of animal weighing function.
Automatic storage
and zeroing symbol
Shows the setting of automatic saving and zeroing function.
M
Memory Symbol Balance is in formula mode
Auto Print symbol Displays set-up of the Auto Print function.
Standby mark
Appears when the balance power supply is in stand-by
mode. It is also displayed when operational function
changes into stand-by mode.
*1 Stabilisation symbol
When the stabilisation symbol is illuminated for a long time, the displayed value may
oscillate when a weight is slowly changed or stabilisation detection range is set to high
value.
Capacity display
Display of units
Stability display