19
PBJ_N-SH-e-1810.docx
7.6 Connection of peripheral devices
Before connecting or disconnecting of additional devices (printer, PC) to the data interface,
always disconnect the balance from the power supply.
With your balance, only use accessories and peripheral devices by KERN, as they are ideally
tuned to your balance.
Terminal for external devices:
Interfaces at the balance
back
1 RS-232C interface
2 DATA IO interface
3 AUX interface
4 DC-IN connection
5 Keyboard interface
7.7 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have reached
the operating temperature (see warming up time chap. During this warming up time the
balance must be connected to the power supply (mains, accumulator or battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
5
4
3
2
1
Summary of Contents for PBJ-N
