KEPCO KLN 100-7.5, Operator'S Manual

Page: 42 / 86

3-6
KLN 750W 121912
TABLE 3-3. MENU FUNCTIONS
Voltage Display Current Display Description Reference
ERR 000 ~ 999 Error Code PAR. 3.3.45
OUT DIR or ENT Output Mode Setting PAR. 3.3.8
P.ON LAST or OFF Power ON Mode PAR. 3.3.9
R.UPT 00.0 ~99.9 Ramp Up Time PAR. 3.3.10
R.DNT 00.0 ~99.9 Ramp Down Time PAR. 3.3.11
MEM.F 01 ~ 16 Memory Flag PAR. 3.3.12
BEEP ON or OFF Key Beep On/Off PAR. 3.3.13
BRIT 0 ~ 5 Display Brightness PAR. 3.3.14
I.O 485 or GPIB
(1)
or LAN
(2)
Interface Select PAR. 3.3.15
485 4.8K, 9.6K, 19.2K,
38.4K, 57.6K,
115.2K
RS-485 baud rate PAR. 3.3.16
GPIB
(1)
01 ~ 31 GPIB Address PAR. 3.3.17
485 001 ~ 254 RS-485 Address PAR. 3.3.18
DHCP
(2)
OFF or ON DHCP function PAR. 3.3.19
S.IP1
(2)
001 ~ 254 Set first part of IP Address PAR. 3.3.20
S.IP2
(2)
001 ~ 254 Set second part of IP Address PAR. 3.3.21
S.IP3
(2)
001 ~ 254 Set third IP part of Address PAR. 3.3.22
S.IP4
(2)
001 ~ 254 Set fourth IP part of Address PAR. 3.3.23
PSOP PM, PS, SM or SS Parallel Master, Parallel Slave, Series Master, Series Slave PAR. 3.3.24
EO.C OFF or ON External On/Off control enable/disable PAR. 3.3.25
CV.M LOC or EXT Voltage set, either LOC (Local) using the front panel or EXT (Exter-
nal) using the analog signal from the Programming Control port. PAR. 3.3.26
CC.M LOC or EXT Current set, either LOC (Local) using the front panel or EXT (Exter-
nal) using the analog signal from the Programming Control port. PAR. 3.3.27
CAL 0000 Calibration password. PAR. 3.3.28
SNnn nnnn Serial Number, where nnnnnn = 6 numbers, two numbers in Voltage
Display, four numbers in Current display. PAR. 3.3.29
FW x.xx Firmware version where xx.x = numbers (cannot be modified) PAR. 3.3.30
HW y.yy Hardware version where y.yy = numbers. PAR. 3.3.31
V.IP1
(2)
001 ~ 254 View first part of IP Address PAR. 3.3.32
V.IP2
(2)
001 ~ 254 View second part of IP Address PAR. 3.3.33
V.IP3
(2)
001 ~ 254 View third part of IP Address PAR. 3.3.34
V.IP4
(2)
001 ~ 254 View fourth part of IP Address PAR. 3.3.35
V.SN1
(2)
001 ~ 254 View first part of Subnet Address PAR. 3.3.36
V.SN2
(2)
001 ~ 254 View second part of Subnet Address PAR. 3.3.37
V.SN3
(2)
001 ~ 254 View third part of Subnet Address PAR. 3.3.38
V.SN4
(2)
001 ~ 254 View fourth part of Subnet Address PAR. 3.3.39
V.MA1
(2)
001 ~ 254 View first part of MAC Address PAR. 3.3.40
V.MA2
(2)
001 ~ 254 View second part of MAC Address PAR. 3.3.41
V.MA3
(2)
001 ~ 254 View third part of MAC Address PAR. 3.3.42
RST OFF or ON Reset Function. PAR. 3.3.43
RSTI
(2)
OFF or ON IP Address Reset Function. PAR. 3.3.44
(1) Only if optional GPIB interface installed. (2) Only if optional LAN interface installed.