KLN 750W 121912
3-29
a. If a Message box opens that says “Unable to Connect to 192.168.0.100 port 8003” click
OK, then click File - Properties at the top menu bar of the HyperTerminal window to
open the Properties Dialog Box (Figure 3-8).
FIGURE 3-8. HYPER TERMINAL PROPERTIES
b. Click the Settings tab, then click ASCII setup (see Figure 3-9).
FIGURE 3-9. HYPER TERMINAL ASCII SETUP
c.
Check the “Send line ends with line feeds” and “Echo typed characters locally” boxes.
6. Repeat steps 4 and 5, then, from the computer via the blank HyperTerminal screen, send
syst:rem and ENTER. The green remote
LED at the KLN front panel goes on.
7. Send *idn? query to verify unit is operating properly via the LAN interface. A typical
response for a successful LAN connection is:
KEPCO,KLN 20-38E,500354,01.60
