KLN 750W 121912
1-9
1.8
EQUIPMENT SUPPLIED
Equipment supplied with the KLN 750W power supply is listed in Table 1-3.
1.9
ACCESSORIES
Accessories (not supplied) for the KLN 750W Power Supply are listed in Table 1-4.
TABLE 1-3. EQUIPMENT SUPPLIED
ITEM
DESCRIPTION
KEPCO PART
NUMBER
Power Cable, (125V/15A)
Connects unit to 115V a-c source power.
118-1136
Sense wires: Red, black
Used to connect output to local sensing
connections: red: (+) to +S, black: (–) to –S
N/A
RS-485 Mating connector
Supplied installed on RS-485 port to allow access
to RS 485 interface.
542-0037
Programming Control Port
Mating connector
Supplied installed on Programming Control port to
allow access to pins for analog control and
monitoring.
143-0394
Sense Mating Connector
Supplied installed on Sense connector to provide
access to sense connections used to compensate
for voltage drop on load connections
542-0035
SER IN mating connector
Supplied installed on SER IN connector to allow
series connection of two units.
542-0036
L-type Brackets (2) with
mounting screws (4)
Used with optional rack mounting Kits RA 81-1 or
RA 81-2 to install one or two units in 19-inch rack.
N/A
Output Protective Cover
Supplied with 6V through 100V models only; used
to cover output terminals
N/A
TABLE 1-4. ACCESSORIES
ITEM
FUNCTION
KEPCO
PART NUMBER
Rack Mount Kit
Allows mounting of one half-rack KLN 750W unit in
standard 19-inch rack (L-type brackets supplied with
unit, not included in Kit).
RA 81-1
Rack Mount Kit
Allows mounting of two half-rack KLN 750W units
side-by-side in standard 19-inch rack (L-type brackets
supplied with unit, not included in Kit).
RA 81-2
Parallel Socket Board
Provides convenient connections for parallel
operation of up to five units
536-0129
Series Socket Board
Provides convenient connections for series operation
of two units.
536-0130
Programming Port
Cable
Provides connections between two programming
ports for parallel and series operation.
518-0119
