3-18
KLN 750W 121912
3.3.37
VIEW 2ND PART OF SUBNET MASK ADDRESS (LAN INTERFACE ONLY)
Used to view second part (nnn) of the 4-part Subnet Mask address (xxx.nnn.xxx.xxx) where nnn
is a number from 0 to 255. The default subnet mask address is 255.255.255.0.
1. Enter the menu (see PAR. 3.2.2 and Table 3-3) and rotate the encoder until Voltage display
shows
(V.MN2).
2. Press ENTER key to view setting.
For example,
(255) displayed in Current display for subnet mask address
255.255.255.100.
3.3.38
VIEW 3RD PART OF SUBNET MASK ADDRESS (LAN INTERFACE ONLY)
Used to view third part (nnn) of the 4-part Subnet Mask address (xxx.xxx.nnn.xxx) where nnn is
a number from 0 to 255. The default subnet mask address is 255.255.255.0.
1. Enter the menu (see PAR. 3.2.2 and Table 3-3) and rotate the encoder until Voltage display
shows
(V.MN3).
2. Press ENTER key to view setting.
For example,
(255) displayed in Current display for subnet mask address
255.255.255.100.
3.3.39
VIEW 4TH PART OF SUBNET MASK ADDRESS (LAN INTERFACE ONLY)
Used to view fourth part (nnn) of the 4-part Subnet Mask address (xxx.xxx.xxx.nnn) where nnn
is a number from 0 to 255. The default subnet mask address is 255.255.255.0.
1. Enter the menu (see PAR. 3.2.2 and Table 3-3) and rotate the encoder until Voltage display
shows
(V.MN4).
2. Press ENTER key to view setting.
For example,
(100) displayed in Current display for subnet mask address
255.255.255.100.
3.3.40
VIEW 1ST PART OF MAC ADDRESS (LAN INTERFACE ONLY)
Used to view first two hex numbers (aa.bb) of the 6-character MAC address (aa.bb.cc.dd.ee.ff)
where aa and bb are Hex numbers from 00 to FF. The default MAC address is
70.60.42.00.00.00.
1. Enter the menu (see PAR. 3.2.2 and Table 3-3) and rotate the encoder until Voltage display
shows
(V.MA1).
2. Press ENTER key to view setting.
For example,
(70.46) displayed in Current display for MAC address
70.46.42.00.00.00.
3. The MAC address can be changed using SCPI commands (see Appendix B., PAR. B.41).
