Kenwood KRF-V9993D, Connection Manual

Page: 82 / 180

10
Using R
eceiv
er
How Do I Adjust the Sound?
How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the receiver’s
front panel or PowerTouch.
Turning the Speakers On
To turn on the front A (Room A with the VR-4900/KRF-V9993D) speak-
ers, press the
DOOR OPEN/CLOSE key (VR-4900/KRF-V9993D) or press
the lower part of the door (VR-4700) to open the door and press the
SPEAKERS A key inside the door.
To turn on the front B (Room B with the VR-4900/KRF-V9993D) speak-
ers, press the
SPEAKERS B key located in the door of the receiver’s front
panel. The lighting of a SPEAKERS ( A or B ) lamp indicates that the cor-
responding set of speakers is on.
VR-4900/KRF-V9993D: If you select SPEAKERS B (Room B) while lis-
tening to a surround mode in Room A, the sound in Room A will auto-
matically revert to stereo. While
SPEAKERS B is on surround made can-
not be selected.
VR-4700: If you select SPEAKERS B while listening to a surround mode,
the sound will automatically revert to stereo. While SPEAKERS B is on
surround made cannot be selected.
If you use speakers connected to amplifiers via the PRE OUT jacks, choose
Front A speakers.
L SPEAKERS R I NPUT
MODE CD 2/TAPE 2
MONITOR
LISTEN
MODE
SET UP SOUND
MULTI
CONTROL
fi %
P.CALL MEMORY AUTO BAND
fi %
VR-4900/KRF-V9993D
Speaker indicators
L SPEAKERS R I NPUT
MODE CD 2/TAPE 2
MONITOR
LISTEN
MODE
SET UP SOUND
MULTI
CONTROL
fi %
P.CALL MEMORY AUTO BAND
fi %
VR-4700
Speaker indicators