Kenwood KRF-V9993D, Connection Manual

Page: 46 / 180

40
R
emote Setup
Chapter Two : Setting Up PowerTouch
Your new PowerTouch provides two ways to store radio sta-
tions:
• Manual Memory, which allows you to enter and store
specific stations.
• RDS Automatic Memory (VR-4900 and KRF-V9993D),
which searches for stations broadcasting an RDS signal
and automatically stores them in the first available stor-
age button.
There are 40 preset storage buttons available.
If you have a VR-4900 or KRF-V9993D, search for and store
RDS stations first (see page␣ 41), then set stations manually.
The search function automatically assigns RDS stations to
the first storage button, overwriting any stations already
stored there.
You can overwrite RDS stations with manually stored sta-
tions.
Storing RDS Stations Automatically
(VR-4900 and KRF-V9993D)
1. Touch (music) on the Main menu to access the
Music menu.
2. Touch on the Music menu to access the Tuner
controls.
3. Touch to choose FM.
4. Touch at the top of the screen:
5. Touch . The receiver locates and stores any FM sta-
tions broadcasting an RDS signal. This process can take
a few minutes to complete; please be patient. While the
receiver is searching, “AUTO MEMORY” display blinks.
RDS stations are stored in the order they are found, up to
40 stations. If the search finds fewer than 40 stations, the
receiver may automatically store other FM stations in the
open storage buttons.
If you are repeating the RDS search, any existing preset sta-
tions (whether automatically or manually stored) will be
replaced by the results of the new search.
Storing Radio Stations in Memory (optional)
Storing RDS Station Name (PS Read)
(VR-4900 and KRF-V9993D)
• To execute PS Read, it is required to finish the auto
memory operation in advance.
1. Touch (music) on the Main menu to access the Music
menu.
2. Touch on the Music menu to access the Tuner
controls.