Kemar Kitchenware KCC-280, Instruction Manual

Page: 52 / 68

52
EN
KCC-280
IN A FEW STEPS TO PERFECT PREPARATION
USAGE
A. Turn on the device
Plug the power cord into the power cord jack on the rear panel, and then plug the power cord into
a power outlet. Turn the main switch to the I (ON) position.
After switching on, all fields light up for one second and the device beeps once. The cooker will
switch back to Standby mode, a 4 segment code (- - - -) will be displayed in the center of the
touch display panel and the "Keep Warm/Exit" and "Menu" buttons will illuminate.
B. The button functions
1. Preset automatic programs
There are six preset programs on the display. Press the "Menu" function button to select the
desired program (White Rice, Mixed Rice, Quick Rice, Cook, Rice Porridge and Slow Cook).
When you select the program, the corresponding program indicator flashes. After selecting the
program, the "Rice quantity" button flashes briefly. After confirming the amount of rice (1 for one
measuring cup, 2 for two measuring cups, 3 for three measuring cups and 4 for four measuring
cups of rice), the program will automatically switch to cooking mode after 5 seconds. At the same
time, the "Keep Warm / Cancel" buttons light up, the corresponding program indicator lights up,
and the LED display indicates the cooking time. For “Slow Cook” function, press “rice quantity” to
select the cooking temperature first, after selected, long press “rice quantity” for about 5 seconds
again to select the cooking time. The device switches to the selected cooking mode after
approx.5 seconds. The respective cooking time is shown on the display.
Attention: After you select "White Rice", "Mixed Rice", "Quick Rice" and "Congee" functions, you
need to select "Rice Quantity" to enter cooking mode, otherwise the unit will beep to remind you
next step. With the Cooking program, the cooking time must be selected, while with the Slow
Cook program, the cooking temperature and the cooking time must be selected.
2. Basic operation of the keep warm/exit button
1: After the cooking programs are completed, the keep-warm mode will be activated automatically
and the "Keep-warm" indicator will flash at the same time. The LED display shows a counter for
the holding time from 00:00" to "02:00".
2: Touch the “keep warm/exit” button in standby mode to enter the keep warm function directly.
3: Long press (3 seconds) the "Keep Warm/Exit" button to cancel any program or go to standby
mode.
4 : When the keep-warm program is completed, the appliance automatically returns to standby
mode.
3. Basic operation of “Timer”
1 : After selecting the cooking program in the menu, the timer can be activated.
To do this, press the "Timer" button once immediately, if this is not pressed within 5 seconds after
selecting the cooking program, the selected cooking program will start automatically without
setting the timer.
2: Press the timer button once, the LED display shows 00:30, which means the default time is
00:30; Each time you press the "Timer" button, an additional 30 minutes are added to the timer,
the maximum adjustment is 24 hours. If you press the Timer button, the time jumps faster after 2
seconds. After activation, the corresponding function button light flashes. The selected program
then starts automatically at the desired time. To stop early, press and hold the "Exit" button for 3
seconds.