Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 40 of 43
operation can be repeated as many times with the different SMS’s.
NUMBER OF SMS: 02
ESC
By pressing ESC, the system goes back to the selected option
SUBMENU GSM/SMS:
A.5-READ SMS
SPACE=NEXT
ENTER=SELECT
10.6 - Send SMS
This option sends a test SMS message to a desired telephone number.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
6
Select “Send SMS”, Initially, you get the programmed telephone
number of the Data Center, but in this case you can indicate another
phone number.
INDICATE CENTRAL
TELEPHONE NUMBER
123456789
ENTER
Indicate the number and press ENTER. The system will send the test
SMS
SENDING SMS ...
If the SMS has been sent succesfully, the following message will
appear:
SMS SENT TO
DATA CENTER
Any Key
By pressing any key, the system goes back to the selected option
SUBMENU GSM/SMS:
A.6-SEND SMS
SPACE=NEXT
ENTER=SELECT
10.7 - Read all SMS
This option reads and processes all SMS stored in the memory of the GSM module. Differently to option 10.5, in this case
the systme shows only the process being done at that moment. The messages are treated the same way as in normal
condition (not under test).
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
7
Select “Read all SMS”. The systems starts the process
NOT READ: 1
SENDING SMS ...
EMPTY: 2
When two consecutive empty messages are detected, the system
stops the process.
EMPTY: 3
PRESS ANY KEY TO END
Any Key
By pressing any key, the system goes back to the selected option
SUBMENU GSM/SMS:
A.7-READ ALL SMS
SPACE=NEXT
ENTER=SELECT
