Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 37 of 43
10 - GSM MODULE (optional feature)
The connection of a GSM module to the serial port #2 allows the remote control of the unit. By this system, it is possible to
send and receive some data from the unit, such as prices, ticket headers, parameters, etc. and also to ask and receive
rreports about the status of the unit and of the collection, as well as receive warnings from the unit when some events
happen.
10.0 - Reset of the modem
This option sends the initialization commands to the modem.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
0
Resets modem
RESETTING MODEM...
If everything is allright, the menu goes to the previous screen. In
case of error, the screen would be the one beside
MODEM NOT RESPONDING
PRESS ANY KEY TO END.
10.1 - Reset step by step
This option is similar to the previous one, but in this case, the system stops before sending every one of the initialization
commands.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
1
Resets modem step by step
RESETTING MODEM...
Any key
Press any key to send the command “+CLIP” (except “Z” or “ESC”,
which cancel the operation)
+CLIP=1
PRESS ANY KEY
Any key
Press any key to send the command “+CMGF”
+CMGF=1
PRESS ANY KEY
Any key
Press any key to send the command “+CNMI=0,0,0,0,1”
+CNMI=0,0,0,0,1
PRESS ANY KEY
Any key
Press any key to send the command “+CSMS”=0
+CSMS=0
PRESS ANY KEY
Any key
Press any key to send the command “S0=0”
S0=0
PRESS ANY KEY
Any key
Press any key to send the command “&W=0”
&W=0
PRESS ANY KEY
