Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 27 of 43
5.1 - Paper feed
This action starts the printer mechanism so that the paper is fed. It is used when replacing the roll of paper.
Proceed as follows:
Key
Function to execute or select
Terminal Display
Raise the papaer cutter
Raise the printer head by raising the grreen lever.
Place the new paper roll in such a way that it unrolls from behind.
Insert the paper passing it behind the black roller until it comes up
to the front about 20cm. Make sure it is centered and straight.
Low the printer head by lowing the green lever and pass the paper
throught the cutter.
Low the cutter to its normal position
Pull firmly the paper to ensure that there are no curls between the
printer and the cutter.
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
5
Select the printer adjustments.
SUB-MENU PRINTER:
5.0-RESET
SPACE=NEXT
ENTER=SELECT
1
Select the paper feed. Make sure that the paper comes up centered
and straight.
PAPER OK C.CLOSED
ESC: END TEST
ESC
When pressing ESC the printer stops. The program goes back to
option 1 of the printer adjustment sub-menu
SUB-MENU PRINTER:
5.1-PAPER FEED
SPACE=NEXT
ENTER=SELECT
5.2 - Printer test nº 1
This option makes a printer test that starts and stops the paper feed at every line.
Proceed as follows:
Key
Function to execute or select
Display del terminal
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
5
Select the printer adjustments.
SUB-MENU PRINTER:
5.0-RESET
SPACE=NEXT
ENTER=SELECT
2
Select test nº1 printing by impulsions
1,550ms 3,2v 20,1º
PAPER OK C.CLOSED
ESC: END TEST
KEY: STOP PRINTER
ESC
When pressing any key the test ends and the programme goes back
to option 2 of the printer adjustment sub-menu.
SUB-MENU PRINTER:
5.2-TEST Num. 1
SPACE=NEXT
ENTER=SELECT
