Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 11 of 43
0.3 - Programming of the prices and coins
This optión allows the changement of the default prices of use set in the software of the unit, as well as the value of each
coin slot. First of all, you must program the prices of use and after you indicate the value for each one of the slots installed
in the unit. When you change the prices of use, remember to change also the stickers above the coin entries which indicate
the price to pay.
Important note:
To activate the use of the unit, you can use any of the coins acccepted by the coin salots. For example, you can program the
ful operation at 1,20€ (supposing that the slots present in the unit are of 1€ and 0,2€). In this case, the user must insert a
coin of each type, or six coins of 0,2€, until completing the amount for the fulloperation.
In the following example, the unit is set to 1€ for the full operation, 0,40€ for the partial operation, and the slots present in
the unit are of 1€ for slot 1 and 0,20€ for slot 2:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
0
Select the system adjustments
SUB-MENU SYSTEM:
0.0-MEMORY RESET
SPACE=NEXT
ENTER=SELECT
3
Select the programming of the price. The display shows the price for
the full operation currently programmed. This price is correct in our
example, so you press “ENTER” to go to the next screen.
INDICATE PRICE 1 IN
EUROS
AND PRESS ENTER: 01,00
ENTER
The display shows now the price for the partial operation currently
programmed.
INDICATE PRICE 2 IN
EUROS
AND PRESS ENTER: 00,20
0040
Program 0,40€.
INDICATE PRICE 2 IN
EUROS
AND PRESS ENTER: 00,40
ENTER
Now the unit asks the value for the coin of slot 1 (slot on the right
handside, first channel for coins)
INDICATE THE VALUE OF
CHANEL 1 IN EUROS
AND PRESS ENTER: 1,00
ENTER
When pressing ENTER, the screen shows the value for the coin of
slot 2 (slot on the left hanside, second chanel for coins).
INDICATE THE VALUE OF
CHANEL 2 IN EUROS
AND PRESS ENTER: 0,10
020
Indicate that chanel 2 for coins is of 0,2€
INDICATE THE VALUE OF
CHANEL 2 IN EUROS
AND PRESS ENTER: 0,20
ENTER
When pressing ENTER, the screen shows the value for the coin of
slot 3 (third chanel for coins). If the unit has got an electronic coin
validator, repeat the process depicted above to indicate the value of
each chanel for coins. If not, press “ENTER” until quit the option of
price and coins programming.
INDICATE THE VALUE OF
CHANEL 3 IN EUROS
AND PRESS ENTER: 0,00
ENTER
...
ENTER
Once the process is finished, the program goes back to option 3 of
the system adjustments sub-menu.
SUB-MENU SYSTEM:
0.3-PRICES
SPACE=NEXT
ENTER=SELECT
