Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 29 of 43
5.5 - Cutter test.
This option allows the verification of the correct operation of the cutter.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
5
Select the printer adjustments.
SUB-MENU PRINTER:
5.0-RESET
SPACE=NEXT
ENTER=SELECT
5
Select the cutter test. The cutter makes continuous cuts in the paper
roll.
PAPER OK C.CLOSED
ESC: END TEST
KEY: STOP PRINTER
ENTER
When pressing any key (ENTER, for example) the test ends and
the programme goes back to option 5 of the printer adjustment
sub-menu.
SUB-MENU PRINTER:
5.5- CUTTER TEST
SPACE=NEXT
ENTER=SELECT
5.6 - Temperature of the printer
This test shows the status of the printer head, without printing.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
5
Select the printer adjustments.
SUB-MENU PRINTER:
5.0-RESET
SPACE=NEXT
ENTER=SELECT
6
When selecting this option, the screen will show the current
temperature of the printer in this moment and the time of
activation of the printer head.
1,536 ms 3,1V.
24,0´C
PAPER OK C.CLOSED
ESC: END TEST
KEY: STOP PRINTER
ENTER
When pressing any key (ENTER, for example) the test ends and
the programme goes back to option 6 of the printer adjustment
sub-menu.
SUB-MENU PRINTER:
5.6- CUTTER TEST
SPACE=NEXT
ENTER=SELECT
