Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 32 of 43
7 - Programming of the ticket header and footer. Option 7 of the
main menu.
The tickets printed by the unit have three sections:
Section
Description
1 - Header
In general, the ticket header is programmed with the data of the premises where
the unit is installed (name, address, etc.)
2 - Results of measurements
Contains the results of the measurements and ideal data.
3 - Footer
The message in this section is optional. It can be used to give advises, or for
promotion. There are 2 messages, and according to the using option selected, the
ticket will have message 1 or 2 (see adjustment of the flags).
The header and end of ticket is composed of 5 lines of 32 characters each one. Since the keyboard of the terminal only has
4 lines of 20 characters, during the programming the lines appear succesively on the display.
The special terminal functions are the following:
Key
Function
ENTER
Every time that you press ENTER, you go to next line. When you are on line 5 and press ENTER, the
programming ends and the text is saved.
ESC
Cancels the process.
<
Moves the cursor to the left
>
Moves the cursor to the right.
^
If you wish a double wide character, press this key before the desired character.
CRTL + C
This combination does the same function as "ENTER" but it also centers the text in the current line.
7.1 - Example of programming
The procedure to program the header and the footers are the same. The only difference is the initial selection:
·
7 0 = Programming the header
·
7 1 = Programming footer 1
·
7 2 = Programming footer 2
Practical example
Suppose that you want to add the text "PERCY STORES" at the beginning of line 2 of the current header.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
7
Select ticket header and footer.
HEADER/FOOTER:
7.0-TICKET HEADER
SPACE=NEXT
ENTER=SELECT
0
Select the programming of the header. The display shows the
contents of the first line.
HEADER-LINE Num.1
MULTIFUNCTION KEITO
K7
PERCY
STORES
Type the name of the store. If you wish double wide characters, type
^P^E^R^C^Y ^S^T^O^R^E^S. Press SPACE to delete all the
remaining original characters and when you reach the end of the line
press CTRL+C to center it
HEADER-LINE Num.2
^P^E^R^C^Y ^S^T^O^R^E^S
(address)
Now the program shows the second line. Proceed as before to
indicate the text of this second line
(text for second line)
