Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 35 of 43
8.3 - List the smart card.
This option lists all the data contained in the card (identification and measurements).
Proceed as follows
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
8
Select the smart card adjustments.
SMART CARD:
8.0-CARD KEY
SPACE=NEXT
ENTER=SELECT
3
Select the card list option. If the card is already inserted the list will
be printed. If not, the unit will ask to insert the card. Pressing any
key when the card is not inserted will cancel the process.
INSERT A CARD
PRESS A KEY
TO END
At the end of the card list the program goes back to option 3 of the
smart card sub-menu.
SMART CARD:
8.3-LIST CARD
SPACE=NEXT
ENTER=SELECT
9 - Voice/Buzzer Test. Option 9 of the main menu.
With this option we can check the correct operation of the audio system of the unit, as well for the buzzer as for the voice
messages.
The volume of the speaker is madde wuth the potentiometer ref. R56 located on the motherboard.
9.0 - Buzzer test
With this option you can verify the correct operation and volume of the speaker. Once accessed this option and the buzzer
is on, if you press 1 on the terminal the buzzer will sound slower and if you press a higher number, the speed of the buzzer
will also increase.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
9
Select the voice and buzzer test
SUB-MENU VOICE/BUZZ:
9.0-BUZZER TEST
SPACE=NEXT
ENTER=SELECT
0
Select the buzzer test
PRESS “ESC” TO END
ESC
Press ESC to end the process. The programme goes back to option 0
of the voice/buzzer sub-menu.
SUB-MENU VOICE/BUZZ:
9.0-BUZZER TEST
SPACE=NEXT
ENTER=SELECT
